A3 L4-2.0L Turbo (BPY) (2006)
1. Remove the incorrectly installed clips (Figures 1 and 2) on the cooling fan housing from the rib since they are outside of the appropriate recesses.
Figure 3
Figure 4
2. Attach new clips so that they are only in the appropriate recesses (Figures 3 and 4).
Warranty
When procedure applies to vehicles under warranty, use the following:
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.