A3 L4-2.0L Turbo (BPY) (2006)
‹› When removing and installing, remove toothed belt => [ Toothed Belt, without Divided Toothed Belt Guard ] See: Toothed Belt, Without
Divided Toothed Belt Guard
‹› Installed position is fixed by woodruff key => [ (Item 7) Woodruff key ]
‹› Camshaft sprocket, removing => [ Pulling off camshaft sprocket ]
5
Bolt
‹› 10 Nm
‹› Insert with locking fluid
6
Rear toothed belt guard
7
Woodruff key
‹› Check for secure seat
8
Nut
‹› 25 Nm
9
Semi-automatic tensioning roller
10
Coolant pump
‹› Removing and installing => [ Coolant Pump ] See: Engine, Cooling and Exhaust/Cooling System/Water Pump/Service and Repair
11
O-ring
‹› Replace
‹› Coat with coolant
12
Bolt
‹› 25 Nm
13
Damper roller
14
Bolt
‹› 15 Nm
15
Bolt
‹› 35 Nm
16
Damper roller
17
Sealing flange
‹› Removing and installing => [ Front Sealing Flange ] See: Engine, Cooling and Exhaust/Engine/Cylinder Block Assembly/Front Engine
Plate/Service and Repair/Front Sealing Flange
18
Toothed belt gear diamond disc
‹› Replace after removing toothed belt gear
19
Crankshaft toothed belt sprocket
‹› There must be no oil on the contact surface between the toothed belt sprocket and crankshaft
‹› Only possible to install in one position