A3 L4-2.0L Turbo (BPY) (2006)
Fuse Block: Service and Repair
Relay and Fuse Holder B
Relay and Fuse Holder B
Observe notes on contact corrosion => [ Contact Corrosion ] See: Wiring Harness/Service Precautions/Vehicle Damage Warnings.
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire => [ Battery, Engine Compartment, Disconnecting and Connecting ] See:
Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery, Engine Compartment, Disconnecting and Connecting.
Vehicles with the old version E-box:
-
Press the retaining clips in - direction of arrow - and remove the E-box cover.
Vehicles with the new version E-box:
-
Slide both latches in - direction of arrow - and remove the E-box cover.
All Vehicles