A3 L4-2.0L Turbo (BPY) (2006)
Preparing Pliers For Fiber Optic Conductor VAS 6223/1
-
Release transportation safeguard at cutter by loosening Allen bolt -arrow-.
Fiber optic cable, cutting to length
-
Establish length of fiber optic cable required.
-
Open Pliers For Fiber Optic Conductor VAS 6223/1 and insert fiber-optic cable -1- into trimming station.
-
Close cutting tool to cut fiber optic cable to length.
Stripping
-
Open Pliers For Fiber Optic Conductor VAS 6223/1.
-
Stripping lever must be in lower position -arrow-.
-
Place fiber optic cable -1- in stripping point.
-
Fiber-optic cable must terminate flush to rear side of cutting pliers.
-
Close Pliers For Fiber Optic Conductor VAS 6223/1 until stop and keep closed.