A3 L4-2.0L Turbo (BPY) (2006)
/Page-2386002.png)
-
Disengage retaining tab - 2 - on bracket - 3 -.
-
Disconnect the connector - 4 - and remove the Data Bus On Board Diagnostic Interface (J533) - item 5 -.
Installing
Install in reverse order of removal, noting the following:
If the data bus on board diagnostic interface ( J533) was replace, it must be coded.
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Install air duct.
-
Install driver storage compartment => Body Interior
68 Removal and Installation.
