A3 L4-2.0L Turbo (BPY) (2006)
-
Pry off caps on wiper arms using a screwdriver.
-
Loosen nuts - arrows - by several turns.
-
Loosen wiper arms from wiper axle by tilting slightly.
-
Then, remove nuts and remove wiper arms from wiper axles.
‹› If wiper arm cannot be removed in this way, use a standard puller.
-
Unclip spray nozzles - arrow -.
-
Push spray nozzles, with water lines still attached, back through the opening and into the plenum chamber.
-
Remove rubber seal - 1 - from plenum chamber cover - 2 -.