audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest:|170916|Page 7385 > < Customer Interest:|170916
Page 2
background image

regulating valve on cold engine start and result in a rough idle or engine stall until warm crankcase gases melt the ice. 

A special winter pressure regulating valve is available for vehicles in cold weather regions operated under extended short trip conditions and exhibiting
the above symptoms.

Tip: This condition only occurs when ambient air temperatures fall below freezing and allow residual water buildup in the crankcase pressure regulating
valve to freeze.

Production Solution

Service

1. Remove the oil filler cap and check for moisture.

If the oil filler cap is heavily coated with grey or white foam, a large amount of water is present in the engine oil.

2. Remove the crankcase pressure regulating valve and check for presence of ice or excessive moisture buildup.

3. Check the part number of the crankcase pressure regulating valve. If the part number of the crankcase pressure regulating valve is 06F 129 101E,
replace with 06F 129 101M.

Note:

Install part number 06F 129 101M only if the removed part number is 06F 129 101E. Damage could occur.

4. Replace the engine oil and filter.

5. Erase any DTCs, if present.

6. Perform test drive and verify repair.

Warranty

Customer Interest:|170916|Page 7385 > < Customer Interest:|170916