A3 L4-2.0L Turbo (BPY) (2006)
The washer - 1 - is installed on vehicles with an aluminum wheel bearing housing.
-
Place trailing arm on wheel bearing housing with bolts - arrows - but do not tighten yet.
-
Install coil spring. Refer to => [ Coil Spring ] See: Steering and Suspension/Suspension/Suspension Spring ( Coil / Leaf )/Service and Repair/Rear
Suspension/Coil Spring.
-
Tighten bolts - arrows -.
-
Tighten coupling rod - arrow - on trailing arm.