A3 L4-2.0L Turbo (BPY) (2006)
/Page-2948001.png)
Transmission Speed Sensor: Service and Repair
Transmission Input Speed Sensor and Clutch Oil Temperature Sensor
Removing
CAUTION!
Do not run engine with the oil pan removed or without transmission oil and do not tow vehicle.
‹› Rules of cleanliness for working on automatic transmissions => [ Clean Working Conditions ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service Precautions/Clean Working Conditions.
‹› General repair notes => [ Repair Information ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Procedures/Repair Information.
‹› Coat O-rings and seals with transmission fluid. Other lubricating substances lead to functional problems in the hydraulic transmission control.
-
Drain transmission fluid => [ Transmission Oil, Draining, Changing and Filling ] See: Maintenance/Fluids/Fluid - A/T/Service and Repair/02E
Transmission/Transmission Oil, Draining, Changing and Filling.
-
Remove oil pan => [ Oil Pan ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Pan/Service and Repair/Removal and
Replacement/02E Transmission/Oil Pan.
-
Remove Direct Shift Gearbox (DSG) Mechatronic ( J743) => [ DSG Mechatronic ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Direct Shift Gearbox (DSG) Mechatronic (J743).
-
Remove bolt - B -.
-
Remove transmission input speed (RPM) sensor ( G182)/clutch oil temperature sensor (G509) - A - together with the wire from the transmission.
Installing
Install in reverse sequence; note the following points:
Torque specifications: => [ Oil Pan, Mechatronic, Transmission Oil Pump ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Fluid Pan/Service and Repair/Removal and Replacement/02E Transmission/Oil Pan, Mechatronic, Transmission Oil Pump
-
Coat Transmission Input Speed (RPM) Sensor (G182 )/Clutch Oil Temperature Sensor (G509) - item A - with transmission fluid and insert it into
