A3 L4-2.0L Turbo (BPY) (2006)
/Page-295002.png)
-
Remove screws -arrows-.
-
Swivel down front interior light/reading light and remove from headliner opening.
-
Disconnect the electrical connectors.
-
Where applicable, release clips -arrows- and remove sensor -1- from interior light/reading light.
NOTE: Disregard -2-.
-
Where applicable, disconnect electrical connection -1- at interior microphone -2- (for BOSE(R) sound system).
Installing
Install in reverse order of removal, noting the following:
-
Fit interior light and secure.
-
Press on reading light cover until it engages.
Tightening torque
Interior light to roof trim - screw: 2.6 Nm