A3 L4-2.0L Turbo (BPY) (2006)
Brake Light Switch: Service and Repair
Brake Light Switch
‹› To ensure secure installation, switch may only be installed once.
Removing
-
Remove driver side storage tray: => Body Interior
68 Removal and Installation
-
Separate electrical connection.
-
Remove brake Brake Light Switch (F) by rotating it 45° toward the left.
Installing
Installation is in reverse order of removal, with special attention to the following:
-
Pull out plunger of brake light switch completely - arrow -.
-
Insert retaining tabs of switch - 1 - and - 2 - into the intended notches in the installation opening and secure switch by rotating it 45° toward the
right.
-
Connect brake light switch connector.
‹› The brake pedal must not be actuated during installation.
‹› When installing the brake light switch, the plunger adjusts itself automatically.
-
Check function of the brake lights by actuating and unactuating brake pedal.