A3 L4-2.0L Turbo (BPY) (2006)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor, From 11.04
Fuel Level Sensor, from 11.04
Removing
Observe safety precautions => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service Precautions/Vehicle
Damage Warnings/Safety Precautions/Fuel Supply System.
Observe rules for cleanliness => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Clean Working Conditions/Fuel Supply System.
-
Remove fuel delivery unit => [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair/Fuel Delivery Unit.
Version 1:
CAUTION!
Before remove electrical connectors on Fuel Level Sensor (G), first release contact retaining tabs.
-
Disengage electrical connectors - 1 to 3 - and disconnect them.
-
Pry on retaining tabs - 4 - and - 5 - with a screwdriver and pull fuel level sensor (G) off downward - arrow -.
Version 2:
-
Release retaining tabs - arrows - with a screwdriver and pull fuel level sensor (G) upward and out.