A3 L4-2.0L Turbo (BPY) (2006)
Fuse Block: Service and Repair
Fuse Holder C, Driver Side
Fuse Holder C, Driver Side
Special tools, testers and auxiliary items required
‹› Special hook (3370)
Observe notes on contact corrosion => [ Contact Corrosion ] See: Wiring Harness/Service Precautions/Vehicle Damage Warnings.
Removing
-
With ignition switched off, disconnect ground cable at battery:
‹› Battery in engine compartment => [ Battery, Engine Compartment, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and
Replacement/Battery, Engine Compartment, Disconnecting and Connecting
‹› Battery in luggage compartment => [ Battery, Luggage Compartment, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal
and Replacement/Battery, Luggage Compartment, Disconnecting and Connecting
-
Pry off the left cover on the instrument panel using special hook (3370) - arrow -.
-
Remove driver storage compartment => Body Interior
68 Removal and Installation.
-
Remove the bolts - arrows - for fuse holder C (SC) - item 1 - on the driver side instrument panel.