A3 L4-2.0L Turbo (BPY) (2006)
-
Remove vacuum hose -2- from intake air hose.
-
Disconnect electrical connection from Mass Air Flow (MAF) Sensor G70 -3-.
-
Remove intake air hose -1- from Throttle Valve Control Module J338.
-
Remove upper portion of air cleaner housing -arrow-.
-
Remove air cleaner element.
-
Remove screws -arrows- and remove lower portion of air cleaner housing.
All models:
-
Pull out 6-position relay carrier under electronics box in engine compartment -arrow-.
-
Unclip cover for 6-position relay carrier -arrows-.