A3 L4-2.0L Turbo (BPY) (2006)
Starter Motor: Service and Repair
BPY, CCTA or CBFA Engine w/ DSG Transmission
Starter
Observe notes on contact corrosion => [ Contact Corrosion ] See: Battery/Service Precautions/Vehicle Damage Warnings.
Removing
-
Remove the air guide by releasing the side retainers - arrows -.
-
Unclip the lower air guide by releasing the left and right retainers - arrow A -.
-
Disengage the lower air guide - 2 - at the mounts - 3 - by moving the lower air guide slightly to the rear.
-
Disconnect the air guide pipe - 1 - from the lower air guide - arrow B -.
-
Disconnect the mass air flow (MAF) sensor (G70 ) electrical connector - 1 -.