A3 L4-2.0L Turbo (BPY) (2006)
Alignment: Service and Repair
Lifting Wheel Bearing to Curb Weight Position
Lifting wheel bearing to curb weight position
Special tools, testers and auxiliary items required
^
Engine/transmission jack V.A.G 1383 A
^
Tension strap T10038
^
Wheel hub support T10149
Note:
^
All bolts at suspension parts with bonded rubber bushings must always be tightened in curb weight position (unloaded condition).
Bonded rubber bushings can only be turned to a limited extent.
Therefore, before being tightened, the axle parts with bonded rubber bushings must be brought into a position that corresponds to the position in
driving mode (curb weight position).
Otherwise, rubber bushing will be stressed, resulting in a shortened service life.
By lifting the corresponding suspension using engine/transmission jack V.A.G 1383 A and wheel hub support T10149, this position can be simulated
on a lift.