A3 L4-2.0L Turbo (BPY) (2006)
Ball Joint: Testing and Inspection
Ball Joint, Checking
Checking Axial Play
-
Pull transverse link down and press up again.
Checking Radial Clearance
-
Press wheel firmly in and out at bottom.
‹› Observe lower ball joint while performing checks.
‹› There should not be any noticeable or visible play in either of the two checks.
‹› Make allowance for any wheel bearing play or play in strut mounting at top.
‹› Check rubber boot for damage, replace lower ball joint, if necessary.