A3 L4-2.0L Turbo (BPY) (2006)
Suspension/Ride Height Sensor/Service and Repair/Removal and Replacement/Rear Suspension/Level Control System Sensor Overview.
Continuation for All Vehicles
-
Tighten bolt - arrow - for the lower transverse link - 1 - .
-
Vehicle alignment is required. Refer to => [ Wheel Alignment is Necessary When: ] See: Alignment/Service Precautions.
-
Perform headlamp basic setting. Refer to => [ Level Control System Sensor Overview ] See: Sensors and Switches - Suspension/Ride Height
Sensor/Service and Repair/Removal and Replacement/Rear Suspension/Level Control System Sensor Overview.
-
On vehicles with Audi magnetic ride, reprogram control position.