A3 L4-2.0L Turbo (BPY) (2006)
Wheel Bearing: Procedures
Wheel Bearing Housing and Wheel Bearing Unit, Assembly Overview
Wheel bearing housing and wheel bearing unit, assembly overview
1. Suspension strut
2. Tie rod end
3. Socket head bolt
^
Threaded end of bolt must point in direction of travel
4. Socket-head bolt 8 Nm
^
M6 x 16
5. Left Front ABS Wheel Speed Sensor G47 / Right Front ABS Wheel Speed Sensor G45
^
Before inserting sensor, clean inner surface of bore hole and coat with solid lubricant G 000 650
6. Cover plate
7. Hex nut, 20 Nm plus an additional 90° turn
^
Self-locking
^
Always replace after removal
8. Hex bolt, 12 Nm
^
M6 x 10
9. Vented brake rotor
10. Hex bolt, 200 Nm plus an additional 180° turn
^
M16 x 1.5 x 70
^
Always replace after removal
Vehicle must not be raised when tightening
11. Phillips-head screw 4 Nm
^
M6 x 16
12. Wheel hub with wheel bearing
13. Wheel bearing housing
14. Socket head bolt, 70 Nm and turn an additional 90°
^
M12 x 1.5 x 45
^
Always replace after removal
15. Drive axle
16. Hex nut, 70 Nm plus an additional 90° turn