audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module:|370819|Page 8629 > < All Technical Service Bulletins for Control Module:|370819|Page 8627
Page 1
background image

Control Module: All Technical Service Bulletins
Engine Controls - Engine Intermittently Won't crank

01 08 07 

2010875/4 

November 19, 2008. 

Supersedes Technical Service Bulletin Group 01 number 05-09 dated November 22, 2005 for reasons listed below.

Affected Vehicles

01 Engine Does Not Crank Intermittently

Condition

01-05-09, Nov. 22, 2005

Engine Does Not Crank Intermittently

Customer states that intermittently either:

-

The engine will not crank.

-

Or nothing happens when trying to start engine.

This cranking condition will usually disappear if engine is simply restarted.

There are no DTCs associated with this condition.

Technical Background

Production Solution

Updated ECM software is installed starting with VIN 8P_6A073016

Service

Only perform this Technical Bulletin on affected vehicles showing the condition described above.

If diagnosis does not reveal a malfunction (for example: battery is discharged, etc.), reprogramming of the ECM is necessary.

If ECM Part No. is already 8P0 907 115 B and software data level is 0060 (or higher), update programming is NOT necessary.

"Update - Programming" CD Part No: 8P0 906 961 H, (packaged with Technical Bulletin, Group 24, number 05- 05, dated Oct. 28, 2005), has already
arrived at dealerships.

"Update - Programming" procedure prerequisites:

Tip:

All Technical Service Bulletins for Control Module:|370819|Page 8629 > < All Technical Service Bulletins for Control Module:|370819|Page 8627