A3 L4-2.0L Turbo (BPY) (2006)
-
Screw a container of transmission fluid for direct-shift transmission on oil filler adapter VAS 6262.
-
Screw adapter for oil filling VAS 6262 hand-tight into opening of inspection plug - B -.
-
Hold transmission fluid container as high as possible over transmission and allow fluid to run into transmission.
-
Fill 5.5 liters transmission fluid into direct-shift transmission.
-
Shift selector lever into "P" position and apply parking brake.
-
Press and hold brake pedal.
-
Start engine and allow it to run at idle.
-
With brake pressed, shift through all selector lever positions "P, R, N, D, S" at idle, retaining each position for at least 3 seconds.
-
Place selector lever in position "P".
-
Afterwards, check transmission fluid level and add.