A3 L4-2.0L Turbo (BPY) (2006)
Seals and Gaskets: Removal and Replacement
Right Flange Shaft Seal
Right Flange Shaft Seal
Special tools, testers and auxiliary items required
‹› Extractor lever (T20143/2)
‹› Thrust piece (3377)
Procedure
-
Remove right flange shaft => [ Right Flange Shaft ] See: Front Final Drive, Automatic Transaxle/Differential Output Shaft/Service and
Repair/Right Flange Shaft.
-
Pull out flange shaft seal using Extractor lever (T20143/2).
-
Lightly oil outer circumference of new shaft seal.
-
Fill area between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).
-
Drive in new seal to stop with thrust piece ( 3377), do not distort the seal while doing this.
-
Install right flange shaft => [ Right Flange Shaft ] See: Front Final Drive, Automatic Transaxle/Differential Output Shaft/Service and Repair/Right
Flange Shaft.