A3 L4-2.0L Turbo (BPY) (2006)
-
Lower engine/transmission assembly slightly using the spindle.
-
Remove all components necessary to provide access to the bolts - 1 -.
-
Remove bolts - 1 -.
-
Remove transmission mount - A -.
Installing
Install in reverse sequence; note the following points:
Torque specifications: => [ Subframe Mount Component Overview ] See: Subframe Mount Component Overview
-
Install transmission mount - A -.
-
Fasten transmission mount using new bolts - 1 -.
-
Use spindle of the engine support bridge to lift the transmission up until the transmission support contacts the support arm of the transmission
mount.