A3 L4-2.0L Turbo (BPY) (2006)
/Page-3195002.png)
-
Press the bleeder - 4 - onto the connection on the clutch slave cylinder - 1 - until the clip - 2 - audibly engages.
-
Pull on the bleeder to verify.
-
Install transmission. Refer to => [ Transmission, Installing ] See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transmission, Installing.
-
Bleed the clutch system. Refer to => [ Clutch System, Bleeding ] See: Clutch Hydraulic System/Service and Repair/Procedures/02Q Transmission.
