A3 L4-2.0L Turbo (BPY) (2006)
Wheel Bearing: Removal and Replacement
Rear Suspension (AWD)
Bonded rubber bushing for wheel bearing housing, replacing
Special tools, testers and auxiliary items required
^
30-506B Press tool
^
41-501 Drive bushing
^
3160 Press support
^
3301 Alignment Fixture-4W Dr.Shaft
^
3346 Alignment Fixture-4W Dr.Shaft
^
3350 Alignment Fixture-4W Dr.Shaft
^
Torque wrench V.A.G 1332
Removing
-
Measure dimension from center of wheel to lower edge of wheelhousing.
-
Remove wheel.
-
Remove coil spring.
-
Remove brake carrier with brake caliper and hang on body with tie wire.