A3 L4-2.0L Turbo (BPY) (2006)
-
Lightly oil new seal on outer circumference.
-
Fill area between sealing lip and dust lip - arrow - halfway with Sealing Grease (G 052 128 A1).
-
Drive in sealing ring as far as stop using Sleeve (VW 423).
The rest of the installation follows the reverse order of removal, note the following:
‹› The transmission shift lever can only be inserted in one position.
-
Install transmission shift lever and relay lever. Refer to => [ Transmission Shift Lever and Relay Lever Assembly Overview ] See: Shifter