A3 L4-2.0L Turbo (BPY) (2006)
‹› Replace, refer to => [ Selector Shaft Seal ] See: Seals and Gaskets/Service and Repair/02Q Transmission/Selector Shaft Seal
6
Retaining washer
7
Shift cable
8
Nut
‹› 23 Nm
‹› Self-locking
‹› Replace
9
Transmission shift lever
‹› Only possible to install in one position
‹› Installing, refer to => [ Installing the Transmission Shift Lever ]
‹› Installation location, refer to => [ Installation Position, Transmission Shift Lever/Relay Lever ]
‹› starting in 06.2006 smaller bolt diameter for the cable retainer, refer to => [ Starting in 02.2006, Smaller Bolt Diameter
for the Shift Cable Retainer ] See: Shift Linkage/Shift Cable/Service and Repair/Removal and Replacement/Shift Cable and Selector Cable Assembly
Overview
10
Retaining washer
‹› Discontinued from 05.2007 on the plastic relay lever
11
Selector cable
12
Selector relay lever
‹› Can be made of plastic or metal
‹› Plastic relay lever from 05.2007, refer to => [ Plastic Relay Lever ] See: Shift Linkage/Shift Cable/Description and Operation
13
Slide shoe
14
Bushing
15
Lock elbow
‹› For adjustment of shift mechanism, refer to => [ Shift Mechanism, Adjusting ] See: Adjustments
Installing the Transmission Shift Lever