A3 L4-2.0L Turbo (BPY) (2006)
Power Window Switch: Service and Repair
Drivers Power Window Switch Panel, Removing and Installing
Drivers Power Window Switch Panel, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove front door trim.
-
Remove soundproofing mat from door trim.
-
Remove bolts -arrows- and detach armrest.
-
Disconnect electrical connection.
-
Release retaining hooks on armrest side by pressing retaining element -arrows-.
-
Use small screwdriver to carefully release retaining hooks -2- and -3- on side of trim.
-
Pull window switch -1- downwards out of switch mounting.
Installing
Install in reverse order of removal, noting the following:
-
Press window switch into switch mounting until retaining hooks engage.
-
Install front door trim.
Tightening torque
Armrest to door trim - screw: 2 Nm