A3 L4-2.0L Turbo (CBFA) (2008)
Control Arm Bushing: Service and Repair
Transverse Link Bonded Rubber Bushing
Special tools, testers and auxiliary items required
^
Thrust plate VW 402
^
Punch VW 411
^
Tube T10219/1
^
Drift T10219/2
Bonded rubber bushing, pressing out
-
Press out bonded rubber bushing, as depicted in illustration.
1 Punch VW 411 Tube T10219/1 Thrust plate VW 402
Bonded rubber bushing, pressing in
Bonded rubber bushing must be installed at an angle to avoid damage when pressing in. When pressing in, bonded rubber bushing will straighten itself
out.
-
Apply installation lubricant G 294 421 A1 on outer bonded rubber bushing.
-
Place bonded rubber bushing on at an angle (in direction of transverse link), when doing this the lip -arrow- must slip into hole as shown in the
illustration.
1 Drift T10219/2 Tube T10219/1 Thrust plate VW 402