A3 L4-2.0L Turbo (CBFA) (2008)
Shifter M/T: Service and Repair
Shift Mechanism From MY 2008 Assembly Overview
Shift Mechanism from MY 2008 Assembly Overview
‹› Lubricate mounting areas and slide surfaces with Grease (G 000 450 02).
‹› Selector mechanism, disassembling and assembling. Refer to => [ Selector Mechanism ] See: Service and Repair/Overhaul/Selector Mechanism.
1
Base plate
‹› Bend open tabs to remove
‹› Always replace
2
Gasket
‹› Always replace
3
Selector lever
‹› Can be removed and installed with the shift lever guide installed => [ (Item 15) Shift lever guide ]
4
Damping washer
‹› Slide out of shift lever as far as stop - arrow -
5
Retaining washer