Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove driver's storage compartment.

=> General Body Repairs, Interior; Repair Group 68

• ‒ → Screw out bolts -B- of fuse box -A-.
• ‒ Release clips -C- and detach fuse box from central tube for dash panel.
• ‒ Disengage and lay bare wiring harness at dash panel central tube.

• ‒ → Cut open cable tie -1-.
• ‒ Release cover for fuse box -arrows-.
• ‒ Detach fuses at fuse box.

• ‒ → Pull off retaining strip for connectors -arrows- and take connectors out of fuse box.
• ‒ Unclip socket -1-.

Note:

→ Precise assignment of fuse box can be seen from appropriate current flow diagram.

=> Current Flow Diagrams, Electrical Fault-finding and Fitting Locations binder

Installing

Install in reverse order.

Tightening torque