audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing key-operated switch > < Removing glove box

A3 Mk2

Converting glove box
Converting glove box
   
–  Drill a hole with a diameter of 4 mm at both points marked -1- (2x).
  A69-0178
–  Mark cut-out dimensions -A- 4 mm, -B- 30 mm and -C- 30 mm.
–  Drill a hole with a diameter of 10 mm at edge of mark.
–  Use commercially available compass saw to make glove box cut-out along mark.
  A70-0739

Installing key-operated switch > < Removing glove box