A3 Mk2
|
|
|
| 1 - | Glove box |
| t | Installing |
| – | Place glove box -1- in correct position. |
| – | Plug in connector of supply lead/wiring harness for glove box -6-. |
| – | Plug in connector at key-operated switch to deactivate airbag on front passenger side -E224-. |
| – | Make sure all connectors engage properly (audibly). |
| – | Perform remaining installation in reverse order of removal. |
| 2 - | Dash panel end trim (right-side) |
| 3 - | Bolts (3x) |
| q | Tightening torque: 5 Nm |
| 4 - | Bolts (2x) |
| q | Tightening torque: 5 Nm |
| 5 - | Bolts (2x) |
| q | Tightening torque: 5 Nm |
| 6 - | Connector |
| q | Of supply lead/wiring harness for glove box |
| 7 - | Dash panel |