t
| Brake pedal actuator -V.A.G 1869/2- |
Note Make sure that the brake system (master cylinder, brake hoses, brake lines and brake calipers) works properly and is free of leaks. |
–
| Screw out bleeder screw at one of the front brake calipers. Connect tester for brake pressure regulator -V.A.G 1310 A- and bleed. |
–
| Insert brake pedal actuator -V.A.G 1869/2- between brake pedal and driver's seat. Apply pressure to brake pedal until the gauge indicates a pressure of 50 bar. The pressure must not drop by more than 4 bar during the test period of 45 seconds. |
Renew brake master cylinder if drop in pressure exceeds the specification. |
–
| Move the brake pedal actuator back until the pressure gauge indicates a pressure of 6 bar. |
–
| The pressure should not drop by more than 1 bar within the test period of 3 minutes. |
Renew brake master cylinder if drop in pressure exceeds the specification. |
|
|
|