audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Separating gear lever boot from gear knob > < Exploded view - gear knob with gear lever boot

A3 Mk2

Removing and installing gear knob with gear lever boot
Removing and installing gear knob with gear lever boot
Special tools and workshop equipment required
   
t  Hose clip pliers -V.A.G 1275-
Removing
  Note
The gear knob is removed together with the gear lever boot and the cover for the centre console.
–  Open ashtray (if fitted).
  W00-0451
–  Carefully pry gear lever boot off centre console -arrows-.
–  Pull boot up and over gear knob.
  A34-0684
–  Open clip -arrow- and pull off gear knob together with boot.
Installing
Installation is carried out in reverse sequence; note the following:
–  Push gear knob together with boot onto gear lever as far as stop.
–  Secure gear knob to gear lever with clip -arrow-, using hose clip pliers -V.A.G 1275-.
  A34-0605

Separating gear lever boot from gear knob > < Exploded view - gear knob with gear lever boot