audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Moving interlock button on selector lever handle into installation position (vehicles from 11.2009 onwards) > < Removing and installing selector lever handle (vehicles from 11.2009 onwards)

A3 Mk2

Separating selector lever boot from selector lever handle (vehicles from 11.2009 onwards)
Separating selector lever boot from selector lever handle (vehicles from 11.2009 onwards)
   
Procedure
–  Remove selector lever handle → Chapter.
–  Pull guide -1- off in direction of -arrow-.
  A34-10579
l  Do not touch interlock button -A- when selector lever handle has been removed.
–  Hold upper end of selector lever boot -arrow 1-.
–  Turn selector lever handle in direction of -arrow 2- and pull it off -arrow 3-.
  A34-10580
Installing selector lever boot with selector lever handle:
l  Do not touch interlock button -A- when selector lever handle has been removed.
–  Insert selector lever handle in selector lever boot -arrow 1- (with interlock button turned 90° out of position towards left).
–  Hold upper end of selector lever boot -arrow 2-.
–  Turn selector lever handle in direction of -arrow 3-.
  A34-10581
–  Clip guide -1- upwards into handle in opposite direction of -arrow-.
–  Install selector lever handle → Chapter.
  A34-10579

Moving interlock button on selector lever handle into installation position (vehicles from 11.2009 onwards) > < Removing and installing selector lever handle (vehicles from 11.2009 onwards)