audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Vehicle electrics > < Checking gear oil level in rear final drive "02D/0AV"

A3 Mk2

Checking gear oil level in rear final drive „0BR/0BS/0BY“
Checking gear oil level in rear final drive „0BR/0BS/0BY“
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
  W00-0427
t  Charging device for Haldex coupling 2 -VAS 6291-
Test condition:
l  Vehicle must be level (horizontal).
l  For gear oil specification for rear final drive, refer to → Electronic parts catalogue.
Checking oil level
–  Position drip tray -VAS 6208- under final drive.
  W00-10251
–  Unscrew plug -1-.
The oil level is correct when the rear final drive is filled to the bottom lip of the filler hole.
–  Screw in plug -1- and tighten.
Tightening torque: 15 Nm
Topping up with oil:
–  Using charging device for Haldex coupling 2 -VAS 6291-, fill up with oil until oil comes out between final drive housing and adapter of charging device.
–  Remove charging device and adapter; a certain amount of surplus oil may now come out.
The oil level is correct when the rear final drive is filled to the bottom lip of the filler hole.
–  Screw in plug -1- and tighten.
  N39-10358
Tightening torque: 15 Nm
  N39-10358

Vehicle electrics > < Checking gear oil level in rear final drive "02D/0AV"