audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing engine > < Separating engine and dual-clutch gearbox

A3 Mk2

Securing engine to engine and gearbox support
   
Securing engine to engine and gearbox support
Special tools and workshop equipment required
t  Engine and gearbox support -VW 540-
t  Lifting tackle -2024 A-
t  Engine and gearbox support -VAS 6095-
t  Workshop hoist -VAS 6100-

Procedure
l  Gearbox detached from engine → Chapter „Separating engine from manual gearbox“ or → Chapter „Separating engine and dual-clutch gearbox“.
–  Remove flywheel → Chapter.
   
–  To transport engine, engage lifting tackle -2024 A- on engine and workshop hoist -VAS 6100-.
  Note
To adjust to the centre of gravity of the assembly, the perforated rails of the support hooks must be positioned as shown.
  WARNING
Accident risk from loose components of support bracket.
The support hooks and retaining pins on the support bracket must be secured with locking pins -arrows-.
  A10-10911
–  Secure engine with engine and gearbox support -VW 540- to engine and gearbox support -VAS 6095--arrows-.
  A10-10037

Installing engine > < Separating engine and dual-clutch gearbox