Audi Workshop Service and Repair Manuals

Separating engine and dual-clutch gearbox Special tools and workshop equipment required

t  Shackle -10 - 222 A /12-

t  Workshop hoist -VAS 6100-

Procedure l  Engine/gearbox assembly removed and attached to engine support -T10416-. –  Move electrical connector -1- for Lambda probe -G39- clear at bracket. –  Move clear electrical wiring harness -arrow-.

–  Unscrew bolts -1 and 2- and detach starter from gearbox.

–  Secure gearbox to workshop hoist -10 - 222 A /12- using shackle -VAS 6100-.

–  Unscrew bolts -arrows- and remove cover plate -1-.

–  Remove bolts -2, 3, 4, 6 and 7- securing gearbox to engine.   Note Disregard -items 1, 5, 8 and A-. –  Detach gearbox from engine.