Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing coolant pump >
< Coolant pump - exploded view
A3 Mk2
Power unit
4-cylinder direct petrol injection engine (1.2 ltr. 2-valve turbo), mechanics
Engine cooling
Coolant pump and thermostat
Removing and installing coolant pump pulley
Removing and installing coolant pump pulley
Removing and installing coolant pump pulley
Special tools and workshop equipment required
t
Counterhold tool -T10172- with adapter -T10172/7-
Removing
–
Remove poly V-belt
→ Chapter
.
–
Remove bolts
-arrow-
and detach bracket from engine support.
–
Loosen bolts on poly V-belt pulley for coolant pump using counterhold tool -T10172- with adapter -T10172/7-.
–
Remove bolts and take off poly V-belt pulley.
Installing
Installation is carried out in the reverse order; note the following:
Tightening torques
l
→ Chapter „Assembly mountings - exploded view“
.
l
→ Chapter „Coolant pump - exploded view“
.
–
Install poly V-belt
→ Chapter
.
Power unit
4-cylinder direct petrol injection engine (1.2 ltr. 2-valve turbo), mechanics
Engine cooling
Coolant pump and thermostat
Removing and installing coolant pump pulley
Removing and installing coolant pump >
< Coolant pump - exploded view