Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing coolant pump >
< Coolant pump - exploded view
A3 Mk2
Power unit
4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics
Engine cooling
Coolant pump and thermostat
Removing and installing coolant pump pulley
Removing and installing coolant pump pulley
Removing and installing coolant pump pulley
Special tools and workshop equipment required
t
Water pump wrench -V.A.G 1590-
Note
Check whether the 3 round corners on the water pump wrench -V.A.G 1590- have been filed down to dimension
-a-
= 1 mm. If this is not the case, file the corners down.
Removing
–
Remove poly V-belt
→ Chapter
.
–
Unscrew bolts
-arrows-
and remove bracket from timing chain cover.
–
Remove bolts for coolant pump pulley (counterhold with water pump wrench -V.A.G 1590-).
Installing
l
Tightening torque
→ Chapter
Installation is carried out in the reverse order; note the following:
–
Install poly V-belt
→ Chapter
.
Power unit
4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics
Engine cooling
Coolant pump and thermostat
Removing and installing coolant pump pulley
Removing and installing coolant pump >
< Coolant pump - exploded view