audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Pistons and conrods > < Measuring radial clearance of crankshaft

A3 Mk2

Extracting and driving in needle bearing for crankshaft - vehicles with dual clutch gearbox
Extracting and driving in needle bearing for crankshaft - vehicles with dual clutch gearbox
Special tools and workshop equipment required
   
t  Drift -VW 207 C-
  W00-0369
t  Puller -T10055- with adapter -T10055/3-
  W00-10115
t  -1- Internal puller Kukko 21/2
  W00-0633
Procedure
l  Gearbox removed.
–  Remove flywheel → Chapter.
–  Use internal puller Kukko 21/2, adapter -T10055/3- and puller -T10055- to pull out needle bearing.
  N13-10062
–  Drive in needle bearing with drift -VW 207 C-.
  V13-0446
l  Insertion depth: dimension -a- = 2 mm.
–  Install flywheel → Chapter.
  V13-0428

Pistons and conrods > < Measuring radial clearance of crankshaft