A3 Mk2
Thermostat housing - exploded view of components |
1 - | Retaining clip for coolant pipe |
2 - | O-ring |
q | Renew |
3 - | Coolant pipe |
q | Removing and installing → Chapter |
q | Diagram of coolant hose connections → Chapter |
4 - | 5 Nm |
5 - | Hose connection |
6 - | From bottom of radiator |
q | Diagram of coolant hose connections → Chapter |
7 - | 5 Nm |
8 - | To top of radiator |
q | Diagram of coolant hose connections → Chapter |
9 - | Hose connection |
10 - | O-ring |
q | Renew |
11 - | Compression spring |
12 - | Thermostat plunger |
q | Removing and installing → Chapter |
13 - | Temperature element for thermostat (short) |
q | Removing and installing → Chapter |
14 - | Coolant temperature sender -G62- |
q | Dissipate cooling system pressure before removal if necessary |
15 - | Retaining clip |
q | Check for firm attachment |
16 - | O-ring |
q | Renew |
17 - | 10 Nm |
18 - | Thermostat housing |
q | Removing and installing → Chapter |
19 - | Gasket |
q | Renew |
20 - | From heat exchanger |
21 - | To heat exchanger |
22 - | Temperature element for thermostat (long) |
q | Removing and installing → Chapter |
23 - | Thermostat plunger |
q | Removing and installing → Chapter |
24 - | Compression spring |
25 - | O-ring |
q | Renew |
26 - | Seal |
q | Renew |
27 - | To coolant expansion tank |