Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing sump (bottom section) >
< Removing and installing coarse oil separator, engine codes BYT, BPU
A3 Mk2
Power unit
4-cylinder direct petrol injection engine (1.8 ltr., 2.0 ltr. 4-valve turbo), mechanics
Engine lubrication / Sump and oil pump
Removing and installing coarse oil separator, engine codes BZB, CAWB, CBFA, CCTA, CDAA, CCZA
Removing and installing coarse oil separator, engine codes BZB, CAWB, CBFA, CCTA, CDAA, CCZA
Removing and installing coarse oil separator, engine codes BZB, CAWB, CBFA, CCTA, CDAA, CCZA
Removing
–
Remove noise insulation
→ Rep. Gr.66
.
Cabriolet
–
Remove noise insulation frame
→ Rep. Gr.50
.
All models:
–
Remove bolts
-1 … 9-
and detach coarse oil separator.
Caution
Protect lubrication system against contamination.
Seal off opening with clean cloth.
Installing
Note
t
Renew gaskets and seals.
t
Secure all hose connections with the correct type of hose clips (same as original equipment)
→ Electronic parts catalogue
.
Installation is carried out in the reverse order; note the following:
–
Tightening sequence for coarse oil separator
→ Fig. „Tightening sequence for coarse oil separator, engine codes BZB, CAWB, CBFA, CCTA, CDAA, CCZA“
Power unit
4-cylinder direct petrol injection engine (1.8 ltr., 2.0 ltr. 4-valve turbo), mechanics
Engine lubrication / Sump and oil pump
Removing and installing coarse oil separator, engine codes BZB, CAWB, CBFA, CCTA, CDAA, CCZA
Removing and installing sump (bottom section) >
< Removing and installing coarse oil separator, engine codes BYT, BPU