Parts of cooling system (on body) |
WARNING Hot steam/hot coolant can escape - risk of scalding. |
t
| The cooling system is under pressure when the engine is hot. |
t
| To allow pressure to dissipate, cover filler cap on coolant expansion tank with cloth and open carefully. |
|
WARNING Risk of injury as the radiator fans may start up automatically. |
Unplug electrical connectors before starting to work in the area of radiator cowl. |
|
Note t
| The cooling system is under pressure when the engine is hot. If necessary, relieve pressure before commencing repair work. |
t
| Secure all hose connections with the correct type of hose clips (same as original equipment) → Parts catalogue. |
t
| Hose clip pliers -V.A.G 1921- or spring-type clip pliers -VAS 5024 A- are recommended for use in installing spring-type clips. |
t
| Renew gaskets and seals. |
t
| The arrow markings on coolant pipes and on ends of hoses must align. |
t
| If there are slight impressions on the fins, refer to → Chapter. |
|
|
|