A3 Mk2
| Oil pump and sump - exploded view |
| 1 - | Oil level and oil temperature sender -G266- |
| q | Removing and installing → Chapter |
| 2 - | O-ring |
| q | Renew |
| 3 - | Oil drain plug |
| q | 30 Nm |
| 4 - | Seal |
| q | Renew |
| 5 - | Bolt |
| q | Tightening torque and sequence → Fig. |
| 6 - | Sump |
| q | Removing and installing → Chapter |
| 7 - | Bolt |
| q | 16 Nm |
| 8 - | Oil pump |
| q | Removing and installing → Chapter |
| 9 - | Toothed belt |
| 10 - | Dowel sleeves |
| 11 - | Cylinder block |
| 12 - | O-ring |
| q | Renew |
| 13 - | Bolt |
| q | 9 Nm |
| 14 - | Clip |
| 15 - | Guide tube for oil dipstick |
| 16 - | Bolt |
| q | 9 Nm |
| 17 - | Oil intake pipe |
| 18 - | Baffle plate |
| 19 - | Bolt |
| q | 16 Nm |
| 20 - | Bolt |
| q | Self-locking |
| q | Renew |
| q | 9 Nm |
|
|
| Stage | Bolts | Tightening torque |
| 1. | -1 … 20- | 5 Nm in diagonal sequence |
| 2. | -arrows- | 40 Nm |
| 3. | -1 … 20- | Tighten in stages and in diagonal sequence; final torque 13 Nm. |
