A3 Mk2
Poly V-belt drive without air conditioner compressor - exploded view |
1 - | Poly V-belt |
q | Renew. |
q | Removing and installing → Chapter |
2 - | Vibration damper |
q | With poly V-belt pulley |
q | Installation position: hole in vibration damper must be positioned over raised section of crankshaft sprocket |
q | Removing and installing → Chapter |
3 - | Bolt |
q | Renew |
q | Use only genuine bolts → Electronic parts catalogue |
q | 10 Nm + turn 90° further |
4 - | Dowel sleeve |
q | 2x |
q | Ensure correct seating in bracket for ancillaries |
5 - | Bolt |
q | Tightening torque → Rep. gr.23 |
6 - | Bolt |
q | Tightening torque → Item |
7 - | Idler roller |
q | For toothed belt |
8 - | Bolt |
q | Tightening torque → Item |
9 - | Idler roller |
q | For toothed belt |
10 - | Bracket for ancillaries |
q | Removing and installing → Chapter |
11 - | High-pressure pump |
q | Removing and installing → Rep. gr.23 |
12 - | Bolt |
q | Different lengths → Fig. |
q | Tightening torque and sequence → Fig. |
13 - | Alternator |
q | Removing and installing → Electrical system; Rep. gr.27 |
14 - | Bolt |
q | Tightening torque → Electrical system; Rep. gr.27 |