A3 Mk2
| Oil filter bracket and engine oil cooler - exploded view |
| 1 - | Screw plug, 25 Nm |
| 2 - | Seal |
| q | Renew |
| 3 - | Engine oil cooler |
| q | Illustration shows version for 2.0 ltr. engine |
| q | See note → Anchor |
| q | Diagram of coolant hose connections → Chapter |
| 4 - | Seal |
| q | Renew |
| q | Installation position → Fig. |
| 5 - | 14 Nm + 90° further |
| q | Renew |
| q | Tighten in diagonal sequence |
| 6 - | Gasket |
| q | Renew |
| 7 - | Oil filter bracket |
| q | With oil retention valve |
| q | The oil retention valve cannot be renewed separately |
| 8 - | Seal |
| q | Renew |
| 9 - | Oil pressure switch -F1- |
| q | 0.7 bar - brown |
| q | Checking → Chapter |
| q | Tighten to 20 Nm |
| 10 - | Sealing cap, 25 Nm |
| 11 - | O-ring |
| q | Renew |
| 12 - | Oil filter element |
| q | Removing and installing → Booklet808 |
| 13 - | O-ring |
| q | Renew |
| 14 - | Oil supply pipe |
| q | To turbocharger |
| q | Tighten to 22 Nm |
| 15 - | Connection |
| 16 - | Seal |
| q | Renew |
