A3 Mk2
Turbocharger - exploded view |
1 - | 10 Nm |
2 - | Bracket |
3 - | Heat shield |
4 - | Oil supply hose |
q | To connection for oil supply pipe at turbocharger |
5 - | Turbocharger |
q | With position sender for charge pressure positioner -G581- |
q | Can only be renewed with exhaust manifold |
q | Removing and installing: vehicles with front-wheel drive → Chapter, vehicles with four-wheel drive → Chapter. |
6 - | Vacuum hose |
q | From charge pressure control solenoid valve -N75- |
7 - | Gasket |
q | Renew |
q | Note installation position |
8 - | To particulate filter |
9 - | Securing clamp, 7 Nm |
q | For turbocharger/particulate filter |
10 - | Exhaust manifold |
q | Can only be renewed with turbocharger |
11 - | 25 Nm |
q | Renew |
12 - | Connecting pipe |
q | To exhaust gas recirculation cooler |
13 - | Gasket |
q | Renew |
14 - | 25 Nm |
q | Renew |
15 - | 25 Nm |
16 - | 15 Nm |
17 - | O-ring |
q | Renew |
18 - | Banjo bolt, 60 Nm |
19 - | Support |
q | For turbocharger |
q | With oil return pipe |
20 - | Exhaust gas temperature sender 1 -G235- |
q | Removing and installing → Chapter |
q | Coat thread of sender with high-temperature paste; for high-temperature paste refer to → Electronic parts catalogue. |
21 - | Heat shield |
22 - | 25 Nm |
q | Renew |
23 - | Connection |
q | For air cleaner/turbocharger air hose |
24 - | 9 Nm |