Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing turbocharger >
< Removing and installing charge pressure senderG31 / intake air temperature sender 2G299
A3 Mk2
Power unit
5-cylinder direct petrol injection engine (2.5 ltr. 4-valve turbo), mechanics
Exhaust turbocharger, G-charger / Turbocharger
Removing and installing turbocharger air recirculation valveN249
Removing and installing turbocharger air recirculation valveN249
Removing and installing turbocharger air recirculation valve -N249-
Removing
–
Remove air cleaner housing
→ Rep. gr.24
.
–
Unplug electrical connector
-2-
.
–
Unscrew bolts
-1-
and remove turbocharger air recirculation valve -N249-.
Installing
l
Tightening torque
→ Chapter
Installation is carried out in the reverse order; note the following:
Note
Fit new O-ring.
l
Installation position: Lug
-2-
on turbocharger air recirculation valve -N249- must be inserted in hole
-1-
on intake connection.
–
Install air cleaner housing
→ Rep. gr.24
.
Power unit
5-cylinder direct petrol injection engine (2.5 ltr. 4-valve turbo), mechanics
Exhaust turbocharger, G-charger / Turbocharger
Removing and installing turbocharger air recirculation valveN249
Removing and installing turbocharger >
< Removing and installing charge pressure senderG31 / intake air temperature sender 2G299